Defects: small blisters can not be repaired after damage, and the upper foot is poor. Good wear resistance and stabilityMaldegem,PVC floor has ordinary floor raw materials, which can not be compared with the actual effect of sound insulation, and its sound insulation performance can reach - sound shells. Therefore, PVC floor is selected in the natural environment that must be quiet, school libraries, multi-al halls, etc,You will no longer have to worry that the sound of high-heeled shoes and the ground will harm your logical thinking. PVC flooring can show you a more comfortable and personalized living environment.In fact, of the inspection indexes of floor leather, such as wear resistance, water resistance, pollution resistance and flame resistance, are improved with the hardness of floor leather.Therefore, expert Construction: when purchasing floor leather, as long as the surface meets the wear-resistant requirements, there is no need to demand softness, so as to facilitate the comprehensive improvement of other properties.Floor lacquer cloth (also known as floor leather and insulating floor rubber roll) is one of the indispensable or missing floor materials for the decoration of modern power distribution room, substation and communication room. It is not only beautiful and practical, but also has the characteristics of sound and moisture insulation, wear resistance and corrosion resistance. It can be used not only on the floor of living room, but also on the floor of workshop.The ground of the weak point machine room.Nurota,Now there are many solid wood floor renovation boards on the market. The renovation boards are processed with solid wood floors as raw materials. They are recycled at low prices and sold at high prices, with considerable profits.How can we avoid buying refurbished boards?The standard laminate floor surface should contain aluminum oxide wear-resistant paper. It has g, g, g, and even lower. It is directly sprayed with aluminum oxide on the decorative paper. The state stipulates that the surface wear-resistant revolution of the laminate floor for indoor use should be more than revolutions. Only the floor with g wear-resistant paper can meet the requirements. The wear-resistant revolution of g wear-resistant paperThe number of revolutions can reach -, or even lower than g. It is good if the number of revolutions directly sprayed with aluminum oxide can reach -. For those with low wear-resistant revolutions, the material cost is relatively low; because of its low wear-resistant degree, the tool cost during processing is also low. On the contrary, the cost is much higher if the number of wear-resistant revolutions is high. Test: for the ground lacquer cloth with thin thickness, you can tear it by hand. If it can be easily torn off the tear strength of such ground lacquer cloth can not meet the requirements. After gently rolling up and pressing down, if it can not be restored to the original state and leave an indentation, such a product has poor softness.If the layers can be torn by hand, it indicates that the product layers are not well combined, and stratification will soon occur in future use.Plastic floor paint cloth has the advantages of light weight, elasticity good mechanical strength, good foot feeling strength, pollution resistance wear resistance, corrosion resistance, heat insulation, sound insulation, moisture resistance, small water absorption, good insulation, self extinguishing, easy cleaning, simple construction, convenient maintenance and low price. In a large number of civil buildings and public places, it has high requirements for cleanlinessIt is widely used in the laboratory.Plastic floor paint cloth belongs to soft floor. It is a floor coil produced by coating or calendering on sheet continuous substrate with polyvinyl chloride resin as the main raw material and appropriate additives.The length of each roll of plastic floor paint cloth is m ~ m,MaldegemFloor selection, the width is mm ~ mm ~ mm, and the total thickness is mm (machine room) ~ mm (plant and public buildings)For long-term indoor use, high and medium grade products should be selected, and products produced by well-known brands and regular enterprises should be purchased as far as possible. Such products have sufficient thickness and good interlayer adhesion and are not easy to layer and curl, especially foamed leather, which gives people a comfortable and elegant feeling. If you want to use them for a short time or one-time cover, you can choose low-grade products, because low-grade productsThe price is low and there are many prices to choose from, but many of these products are processed with waste materials, with poor flexibility, generally thin thickness and large shrinkage coefficient. When checking the appearance quality of rubber plastic floor paint cloth, it should be under scattered sunlight or fluorescent lamp, and the illumination should be ( ± LX, LM from the tested sample, conduct oblique visual inspection. First, observe whether there are cracks, fractures and delaminations on the surface of the local lacquer cloth. If there are, it can be judged that the local lacquer cloth is unqualified. The second step is to observe whether there are wrinkle marks, or if there is any defect of the transparent wear-resistant film on the surface, it is the first-class product and the first-class product. If there is a slight missing print or lack of film, it is the qualified product, otherwise it is the unqualified product. Finally, carefully check whether there is deviation in the multi-color overprint on the surface, whether there is color difference in different parts, if the top-class product is uneven, if there are the above two defects, but if there is no obvious, it is the first-class productProducts that obviously have the above defects but do not affect the overall beauty are judged as qualified products. Finally, the appearance quality of ground lacquer cloth is determined based on the above judgment. When selecting ground lacquer cloth, first smell whether it has pungent smell. There will be a slight smell after the good coil is opened, and the smell of inferior products is stronger; secondly, calculate the use area, and the same room should be selectedCoiled materials with the same batch number, pattern and thickness. When purchasing, carefully observe the appearance quality, open a roll of ground lacquer cloth, separate the ends for a few meters, observe the surface layer of the sample, the surface layer is thick, the wear-resistant layer is thick, and the service time is long, and then observe whether there are cracks, fractures, wrinkles, bubbles and large defects; whether the cross section is layered and cracked; whether the pattern is open, missing, lack of film and overprint deviationDefects such as color difference, color difference and pollution.

One week later, the floor sank to the bottom, and the color of the water turned yellow and black. The water contained a lot of impuritiesTactile effect: when people contact with wood, the temperature is close in four seasons. When walking on the wood floor, the hardness is moderate and the elasticity is rich. Wood gives people a good sense of touch. High price performance price ratio: due to different structures, the regulations on wood are not too high. Raw materials can be used flexibly, second only to stone. It will automatically extinguish after leaving the flame for seconds Fire protection: the fire rating of SPC floor is B, flame retardant, non spontaneous combustion, and will not produce toxic and harmful gases.It is suitable for occasions with high fire protection requirements.Structure: solid wood surface material, basic manual.In order to better prevent excessive water from penetrating into the inner layer of wood floor, reduce excessive water as much as possible and dry the mop.In addition, when applying wax after cleaning the wood floor, spray wax agent shall be selected to make the wax easy to apply evenly.Wipe off too much oil with a soft cloth to avoid bright spots.Don&#;t rush to choose the wood floor coated with light wax, and dry it naturally at night.

Second, specifications and models.When purchasing solid wood multi-layer wood flooring, many customers like to choose wide and long double-layer solid wood flooring. They feel that the really raised flooring looks level and atmospheric at home.In fact, the longer the better the floor, it will endanger the reliability of double-layer solid wood floor.The length and total width of solid wood multilayer wood floor should be short, not suitable for long, narrow, not suitable for wide.Application process,Advantages: of course, the grain is comfortable, wear-resistant, corrosion-resistant, moisture-resistant, and the maintenance is better than that of solid wood.Suitable soil temperature, can also be paved in the kitchen.The utility model has the advantages of convenient installation and maintenance, solid wood composite floors mostly use adhesives with low formaldehyde emission, and good environmental protection effect.The meaning of brand is by no means limited to the popularity of the enterprise.A mature and successful brand does not have strength and popularity, but forms a strong psychological connection with consumers.A recognized brand is established through the long-term interaction between enterprises, products and consumers. It is bred in the eyes of consumers by many factors, such as the accumulation of time, the practical action of enterprises, the continuous improvement of products and services and so on.Enterprise brand is a commitment and an attitude of an enterprise, which is a guarantee for consumers.Therefore when consumers choose products, they&#;d better choose big brands to get better guarantee of quality, service and so on.Maldegem, Look at the section of the board.The wear resistance of laminate floor mainly depends on the content of aluminum oxide in the surface layer, and a certain number of wear-resistant revolutions corresponds to a certain content of aluminum oxide.For household floors the number of wear-resistant revolutions is usually more than revolutions, it is usually more than revolutions. You can buy it on demand.However SPC floor and plastic are not the same thing at all. SPC floor does not need glue in the production process,MaldegemWooden floor quotation, does not contain toxic substances such as formaldehyde and benzene, and does not have radiation. It is a green environmental protection decoration material and will not cause harm to human body.